Méthode pratique de calcul d'un pieu isolé, à l'aide du pénétromètre statique
Rev. Fr. Geotech., 10 (1980) 55-64
Publié en ligne : 2017-10-09
Article cité par
La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).
Article cité :
Citations de cet article :
Research on the plastic radius of pile penetration in CPT clayey seabed
Qingdong Wu, Xipeng Qin, Yingying Zhang, Xiaoliang Jia, Jijun Miao, Caiwei Liu, Yanchun Liu and Zhongnian YangMarine Georesources & Geotechnology 43 (7) 1141 (2025)
https://doi.org/10.1080/1064119X.2024.2389453
Assessment of Axial Resistance of Piles Considering Consolidation Setup and Aging Setup Using Direct Pile Cone Penetration Test Methods
Isam A. Khasib and Murad Y. Abu-FarsakhTransportation Research Record: Journal of the Transportation Research Board 2678 (10) 1286 (2024)
https://doi.org/10.1177/03611981241236789
Evaluating the Direct CPT-Based Design Methods for Estimating the End Bearing and Side Resistance of Instrumented Test Piles
Isam Khasib, Mohsen Amirmojahedi and Murad Abu-FarsakhGeotechnical and Geological Engineering 42 (7) 5871 (2024)
https://doi.org/10.1007/s10706-024-02861-x
Bearing Capacity Evaluation of Deep Foundations in Liquefiable Soils Using Piezocone Test Data
Mohammad Maleki, Abolfazl Eslami, Ali Nabizadeh and Amin BahmanpourGeotechnical and Geological Engineering 42 (8) 6833 (2024)
https://doi.org/10.1007/s10706-024-02885-3
https://doi.org/10.1002/9781394192281.refs
Probabilistic Analysis of Bored Pile Foundations in the Design Phase: An Application Example
Caio Gorla Nogueira, Henrique Svizzero Boni and Heraldo Luiz GiachetiGeotechnical and Geological Engineering 40 (1) 335 (2022)
https://doi.org/10.1007/s10706-021-01893-x
Piezocone/cone penetration test-based pile capacity analysis: calibration, evaluation, and implication of geological conditions
Chung R. Song, Binyam Bekele, Alex Silvey, Mark Lindemann and Lucas RipaInternational Journal of Geotechnical Engineering 16 (3) 343 (2022)
https://doi.org/10.1080/19386362.2020.1778214
Statistical Evaluation of CPT and CPTu Based Methods for Prediction of Axial Bearing Capacity of Piles
Parisa Heidari and Mahmoud GhazaviGeotechnical and Geological Engineering 39 (2) 1259 (2021)
https://doi.org/10.1007/s10706-020-01557-2
The Comparison of Pile Bearing Capacity using 8 Direct Method based on CPT data in Surabaya Area
Putu Tantri K Sari and Mila K WardaniIOP Conference Series: Materials Science and Engineering 1144 (1) 012091 (2021)
https://doi.org/10.1088/1757-899X/1144/1/012091
A new approach to estimate the bearing capacity of driven piles
Pantea Azimi, Mehran Karimpour-Fard, Nader Shariatmadari and Cristina TsuhaArabian Journal of Geosciences 14 (13) (2021)
https://doi.org/10.1007/s12517-021-07517-1
Bearing capacity of floating geosynthetic encased columns (GEC) determined on the basis of CPTU penetration tests
Iwona ChmielewskaOpen Engineering 10 (1) 699 (2020)
https://doi.org/10.1515/eng-2020-0078
Evaluation of Ultimate Bearing Capacity of Pre-Stressed High-Strength Concrete Pipe Pile Embedded in Saturated Sandy Soil Based on In-Situ Test
Yingjie Wei, Duli Wang, Jiawang Li, Yuxin Jie, Zundong Ke, Jianguang Li and Tsunming WongApplied Sciences 10 (18) 6269 (2020)
https://doi.org/10.3390/app10186269
A Novel Numerical Method for Calculating Vertical Bearing Capacity of Prestressed Pipe Piles
Rongbao Chen, Jichao Zhang, Zeyu Chen, Meixiang Gu and Xueping FanAdvances in Civil Engineering 2020 (1) (2020)
https://doi.org/10.1155/2020/8828587
Piezocone and Cone Penetration Test (CPTu and CPT) Applications in Foundation Engineering
Abolfazl Eslami, Sara Moshfeghi, Hossein MolaAbasi and Mohammad M. EslamiPiezocone and Cone Penetration Test (CPTu and CPT) Applications in Foundation Engineering 183 (2020)
https://doi.org/10.1016/B978-0-08-102766-0.00007-9
167 (2019)
https://doi.org/10.1061/9780784482094.016
Evaluation of 18 Direct CPT Methods for Estimating the Ultimate Pile Capacity of Driven Piles
Mohsen Amirmojahedi and Murad Abu-FarsakhTransportation Research Record: Journal of the Transportation Research Board 2673 (9) 127 (2019)
https://doi.org/10.1177/0361198119833365
Model of nonlinear behavior applied to prediction of settlement in deep foundations
Jean Rodrigo Garcia and Paulo José Rocha de AlbuquerqueDYNA 85 (205) 171 (2018)
https://doi.org/10.15446/dyna.v85n205.68523
Experimental Verification of Integrity of Low-Pressure Injection Piles Structure – Pile Internal Capacity
Henryk PachlaStudia Geotechnica et Mechanica 39 (4) 77 (2017)
https://doi.org/10.1515/sgem-2017-0038
Applicability of CPT-based methods in predicting toe bearing capacities of driven piles in sand
Le Chi Hung, Tien Dung Nguyen, Ju-Hyung Lee and Sung-Ryul KimActa Geotechnica 11 (2) 359 (2016)
https://doi.org/10.1007/s11440-015-0398-4
Interaction effects on load-carrying behavior of piled rafts embedded in clay from centrifuge tests
Donggyu Park and Junhwan LeeCanadian Geotechnical Journal 52 (10) 1550 (2015)
https://doi.org/10.1139/cgj-2014-0336
CPT-based method for toe resistance of driven piles in sand
Le Chi Hung and Sung-Ryul KimProceedings of the Institution of Civil Engineers - Geotechnical Engineering 168 (6) 498 (2015)
https://doi.org/10.1680/jgeen.14.00142
Cone Penetration Test Based Direct Methods for Evaluating Static Axial Capacity of Single Piles
Fawad S. Niazi and Paul W. MayneGeotechnical and Geological Engineering 31 (4) 979 (2013)
https://doi.org/10.1007/s10706-013-9662-2
Effect of Spatial Correlation of Cone Tip Resistance on the Bearing Capacity of Piles
Jin-Jian Chen and Lianyang ZhangJournal of Geotechnical and Geoenvironmental Engineering 139 (3) 494 (2013)
https://doi.org/10.1061/(ASCE)GT.1943-5606.0000775
A Review of the Design Formulations for Static Axial Response of Deep Foundations from CPT Data (DFI 2013 Student Paper Competition Runner-Up)
Fawad S. Niazi and Paul W. MayneDFI Journal - The Journal of the Deep Foundations Institute 7 (2) 58 (2013)
https://doi.org/10.1179/dfi.2013.7.2.005
New ultimate pile capacity prediction method based on cone penetration test (CPT)
Zhihong Hu, Michael McVay, David Bloomquist, David Horhota and Peter LaiCanadian Geotechnical Journal 49 (8) 961 (2012)
https://doi.org/10.1139/t2012-051
Prediction of pile shaft resistance using cone penetration tests (CPTs)
Mohammad Hassan Baziar, Armin Kashkooli and Alireza Saeedi-AzizkandiComputers and Geotechnics 45 74 (2012)
https://doi.org/10.1016/j.compgeo.2012.04.005
Effect of spatial correlation of standard penetration test (SPT) data on bearing capacity of driven piles in sand
Lianyang Zhang and Jin-Jian ChenCanadian Geotechnical Journal 49 (4) 394 (2012)
https://doi.org/10.1139/t2012-005
Predicting the Ultimate Bearing Capacity of Single Piles Based on CPTU
Yong Hong Miao, Guo Jun Cai and Song Yu LiuAdvanced Materials Research 243-249 4402 (2011)
https://doi.org/10.4028/www.scientific.net/AMR.243-249.4402
670 (2010)
https://doi.org/10.1061/41093(372)35
Assessment of direct CPT and CPTU methods for predicting the ultimate bearing capacity of single piles
Guojun Cai, Songyu Liu, Liyuan Tong and Guangyin DuEngineering Geology 104 (3-4) 211 (2009)
https://doi.org/10.1016/j.enggeo.2008.10.010
Assessment of Direct Cone Penetration Test Methods for Predicting the Ultimate Capacity of Friction Driven Piles
Murad Y. Abu-Farsakh and Hani H. TitiJournal of Geotechnical and Geoenvironmental Engineering 130 (9) 935 (2004)
https://doi.org/10.1061/(ASCE)1090-0241(2004)130:9(935)
Implementation of Cone Penetration Test Technology in Design and Analysis of Driven Piles
Hani H. Titi, Murad Y. Abu-Farsakh and Mark J. MorvantTransportation Research Record: Journal of the Transportation Research Board 1808 (1) 168 (2002)
https://doi.org/10.3141/1808-20