Accès gratuit
| Numéro |
Rev. Fr. Geotech.
Numéro 146, 2016
|
|
|---|---|---|
| Numéro d'article | 2 | |
| Nombre de pages | 11 | |
| DOI | https://doi.org/10.1051/geotech/2016002 | |
| Publié en ligne | 12 février 2016 | |
- Bawden W, Hyett A, Lausch P. 1992. An experimental procedure for the testing of cable bolts in situ. Int J Rock Mech Min Sci 29: 525–533. [CrossRef] [Google Scholar]
- Benmokrane B, Chennouf A, Mitri HS. 1995. Laboratory evaluation of cementbased grouts and grouted rock anchors. Int J Rock Mech Min Sci 32: 633–642. [CrossRef] [Google Scholar]
- Blanco-Martín L. 2012. Theoretical and experimental study of fully grouted rockbolts and cablebolts under axial loads. Mémoire de thèse, MINES-ParisTech (France). [Google Scholar]
- Blanco-Martín L, Tijani M, Hadj-Hassen F. 2011a. A new analytical solution to the mechanical behaviour of fully grouted rockbolts subjected to pull-out tests. Constr Build Mater 25: 749–755. [CrossRef] [Google Scholar]
- Blanco-Martín L, Hadj-Hassen F, Tijani M. 2011b. A new experimental and analytical study of fully grouted rockbolts. In: Proceedings of the 45th US Rock Mechanics/Geomechanics Symposium, San Francisco (USA). [Google Scholar]
- Blanco-Martín L, Tijani M, Hadj-Hassen F, Noiret A. 2013. Assessment of the boltgrout interface behaviour of fully-grouted rockbolts from laboratory experiments under axial loads. Int J Rock Mech Min Sci 63: 50–61. [Google Scholar]
- Dénecé D, Leleu A, Beth M. 2009. Essais de traction boulons d’ancrage. Campagne octobre 2009. Rapport des essais, Sol Data (pour l’Andra). [Google Scholar]
- Enerpac Learning Center. Disponible sur http://www.enerpac.com/en/basic-hydraulics (2012). [Google Scholar]
- Farmer IW. 1975. Stress distribution along a resin grouted rock anchor. Int J Rock Mech Min Sci 12: 347–351. [CrossRef] [Google Scholar]
- Fine J. 1998. Le soutènement des galeries minières. Presses de l’École des Mines, Paris. [Google Scholar]
- Hagan PC. 2004. Variation in load transfer of a fully encapsulated rockbolt. In: Proceedings of the 23rd International Conference on Ground Control in Mining, Morgantown (USA), pp. 242–249 [Google Scholar]
- Hyett AJ, Bawden WF, Macsporran GR, Moosavi M. 1995. A constitutive law for bond failure of fully-grouted cable bolts using a modified Hoek cell. Int J Rock Mech Min Sci 32: 11–36. [CrossRef] [Google Scholar]
- Ivanovic A, Neilson RD. 2009. Modelling of debonding along the fixed anchor length. Int J Rock Mech Min Sci 46: 699–707. [CrossRef] [Google Scholar]
- Kaiser P, Yazici S, Nosé J. 1992. Effect of stress change on the bond strength of fully grouted cables. Int J Rock Mech Min Sci 29: 293–306. [CrossRef] [Google Scholar]
- Laigle F. 2004. Modèle conceptuel pour le développement de lois de comportement adaptées à la conception des ouvrages souterrains. Mémoire de thèse, École Centrale de Lyon (France). [Google Scholar]
- Launay J. 2010. Approche du fonctionnement et du dimensionnement d’une voûte de tunnel renforcée par boulons scellés et béton projeté. Tunnels et Espaces Souterrains 219: 184–193. [Google Scholar]
- Li C, Stillborg B. 1999. Analytical models for rock bolts. Int J Rock Mech Min Sci 36: 1013–1029. [CrossRef] [Google Scholar]
- Moosavi M, Jafari A, Khosravi A. 2005. Bond of cement grouted reinforcing bars under constant radial pressure. Cem Concr Compos 27: 103–109. [CrossRef] [Google Scholar]
- Offner C, Galvin J, Fabjanczyk M. 2000. Evaluating anchoring mechanisms of fully encapsulated rock bolts. In: Proceedings of the 19th International Conference on Ground Control in Mining, Morgantown (USA), pp. 255–260 [Google Scholar]
- Pakalnis R, Peterson DA, Mah GP. 1994. Glass fibre cable bolts - an alternative. Bull Can Inst Min Metall 87: 53–57. [Google Scholar]
- Popov EP. 1978. Mechanics of materials. Prentice Hall, NJ. [Google Scholar]
- Reichert RD, Bawden WF, Hyett AJ. 1992. Evaluation of design bond strength for fully grouted bolts. Bull Can Inst Min Metall 85: 110–118. [Google Scholar]
- Ren FF, Yang ZJ, Chen JF, Chen WW. 2010. An analytical analysis of the full-range behaviour of grouted rockbolts based on a tri-linear bond-slip model. Constr Build Mater 24: 361–370. [CrossRef] [Google Scholar]
- Reynolds C. 2006. Testing and standards for rock reinforcement consumables. Report 411, RMT Ltd (for the UK Health and Safety Executive). [Google Scholar]
- Saeb S, Amadei B. 1992. Modelling rock joints under shear and normal loading. Int J Rock Mech Min Sci 29: 267–278. [CrossRef] [Google Scholar]
- Stillborg B. 1986. Professional users handbook for rock bolting. Trans Tech Publications, Clausthal. [Google Scholar]
- Tincelin E, Fine J. 1991. Mémento du boulonnage. Presses de l’École des Mines, Paris. [Google Scholar]
- Verderame GM, Ricci P, De Carlo G, Manfredi G. 2009. Cyclic bond behaviour of plain bars. Part I: experimental investigation. Constr Build Mater 23: 3499–3511. [CrossRef] [Google Scholar]
- Windsor CR, Thompson AG. 1993. Rock reinforcement - Technology, testing, design and evaluation. Comprehensive rock engineering. Pergamon Press, Oxford. 451–484 [Google Scholar]
- Yacizi S, Kaiser PK. 1992. Bond strength of grouted cable bolts. Int J Rock MechMin Sci 29: 279–292. [CrossRef] [Google Scholar]
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.