Free Access
Issue |
Rev. Fr. Geotech.
Number 177, 2023
Hommage à Pierre Bérest
|
|
---|---|---|
Article Number | 5 | |
Number of page(s) | 12 | |
DOI | https://doi.org/10.1051/geotech/2024020 | |
Published online | 11 April 2024 |
- Backers T. 2004. Fracture Toughness Determination and Micromechanics of Rock Under Mode I and Mode II loading [GFZ Potsdam, Germany]. PhD Thesis https://doi.org/10.2312/GFZ.b 103-05055 [Google Scholar]
- Backers T, Fardin N, Dresen G, Stephansson O. 2003. Effect of loading rate on Mode I fracture toughness, roughness and micromechanics of sandstone. Int J Rock Mech Mining Sci 40: 425–433. [CrossRef] [Google Scholar]
- Brevik NO. 2016. Experimental Study of Fracture Toughness in Sedimentary Rocks. Master thesis. NTNU, Norway. xx [Google Scholar]
- Chung J, Lee H, Kwon S. 2019. Numerical investigation of radial strain ‑ controlled uniaxial compression test of Äspö Diorite in grain‑based model. Rock Mech Rock Eng 52: 3659–3674. [CrossRef] [Google Scholar]
- Fowell RJ, Hudson JA, Xu C, Chen JF, Zhao X. 1995. Suggested method for determining mode I fracture toughness using Cracked Chevron Notched Brazilian Disc (CCNBD) specimens. Int J Rock Mech Mining Sci 32: 57–64. [CrossRef] [Google Scholar]
- Geremia D, David C, Descamps F, Menéndez B, et00A0;al. 2021a. Water-induced damage in microporous carbonate rock by low-pressure injection test. Rock Mech Rock Eng 1: 3. [Google Scholar]
- Geremia D, David C, Ismail R, El Haitami A. 2021b. An integrated study of water weakening and fluid rock interaction processes in porous rocks: linking mechanical behavior to surface properties. Appl Sci 11: 11437. [CrossRef] [Google Scholar]
- Guéguen Y, Palciauskas V. 1994. Introduction to the physics of rocks. Princeton University Press. xx [Google Scholar]
- Guo TY, Wong LNY, Wu Z. 2021. Microcracking behavior transition in thermally treated granite under mode I loading. Eng Geol 282: 105992. [CrossRef] [Google Scholar]
- Haberfield CM, Johnston IW. 1990. Determination of the fracture toughness of a saturated soft rock. Can Geotech J 27: 276–284. [CrossRef] [Google Scholar]
- Iqbal MJ, Mohanty B. 2007. Experimental calibration of ISRM suggested fracture toughness measurement techniques in selected brittle rocks. Rock Mech Rock Eng 40: 453–475. [CrossRef] [Google Scholar]
- Kataoka M, Obara Y, Kuruppu M. 2015. Estimation of fracture toughness of anisotropic rocks by semi-circular bend (SCB) tests under water vapor pressure. Rock Mech Rock Eng 48: 1353–1367. [CrossRef] [Google Scholar]
- Kuruppu MD, Chong KP. 2012. Fracture toughness testing of brittle materials using semi-circular bend (SCB) specimen. Eng Fract Mech 91: 133–150. [CrossRef] [Google Scholar]
- Kuruppu MD, Obara Y, Ayatollahi MR, Chong KP, Funatsu T. 2014. ISRM-suggested method for determining the mode I static fracture toughness using semi-circular bend specimen. Rock Mech Rock Eng 47: 267–274. [CrossRef] [Google Scholar]
- Lee HP, Olson JE, Holder J, Gale JFW, Myers RD. 2014. The interaction of propagating opening mode fractures with preexisting discontinuities in shale. J Geophys Res 120: 169–181. [Google Scholar]
- Muñoz-Ibáñez A, Delgado-Martín J, Herbón-Penabad M, Alvarellos-Iglesias J. 2021. Acoustic emission monitoring of mode I fracture toughness tests on sandstone rocks. J Petroleum Sci Eng 205: 108906. [CrossRef] [Google Scholar]
- Nasseri MHB, Mohanty B, Young RP. 2006. Fracture toughness measurements and acoustic emission activity in brittle rocks. Pure Appl Geophys 163: 917–945. [CrossRef] [Google Scholar]
- Noël C, Baud P, Violay M. 2021. Effect of water on sandstone’s fracture toughness and frictional parameters: brittle strength constraints. Int J Rock Mech Mining Sci 147: 104916. [CrossRef] [Google Scholar]
- Ouchterlony F. 1989. On the background to the formulae and accuracy of rock fracture toughness measurements using ISRM standard core specimens. Int J Rock Mech Geomech Abst 26: 13–23. [CrossRef] [Google Scholar]
- Staub I, Andersson JC, Magnor B. 2004. Äspö Pillar Stability Experiment. SKB Report. xx [Google Scholar]
- Sun Z, Ouchterlony F. 1986. Fracture toughness of Stripa Granite cores. Int J Rock Mech Min Sci Geomech Abstr 23: 399–409. [CrossRef] [Google Scholar]
- Tromans D, Meech JA. 2002. Fracture toughness and surface energies of minerals: theoretical estimates for oxides, sulphides, silicates and halides. Miner Eng 15: 1027–1041. [CrossRef] [Google Scholar]
- Wolgast D, Konietzky H. 2013. Internal report (unpublished) on the petrophysical and mechanical properties of granites from Erzgebirge, Germany. Institut für Geotechnik, Freiberg. [Google Scholar]
- Xu Y, Dai F, Zhao T, Xu N wen, Liu Y. 2016. Fracture toughness determination of cracked chevron notched Brazilian disc rock specimen via Griffith energy criterion incorporating realistic fracture profiles. Rock Mech Rock Eng 49: 3083–3093. [CrossRef] [Google Scholar]
- Zang A, Wagner FC, Stanchits S, Janssen C, Dresen G. 2000. Fracture process zone in granite. J Geophys Res: Solid Earth 105: 23651–23661. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.