Issue |
Rev. Fr. Geotech.
Number 116, 2006
|
|
---|---|---|
Page(s) | 3 - 13 | |
DOI | https://doi.org/10.1051/geotech/2006116003 | |
Published online | 09 October 2017 |
Propriétés des argiles marines de grande profondeur(1)
Properties of deepwater marine clays
1 Laboratoire de mécanique des sois structures et matériaux UMR CNRS 8579 École centrale Paris grande voie des Vignes 92295 Châtenay-Malabry Cedex jean-louis.favre@ecp.fr, France.
2 Laboratoire de physique et mécanique des matériaux ISGMP-UMR CNRS 7554 Île du Saulcy 57045 Metz Cedex 1 hattab@univ-metz.fr, France.
Quatorze mètres d’une carotte d’argile marine de grande profondeur, provenant du golfe de Guinée, sont analysés suivant un pas très fin de 16,7 cm. Ces propriétés sont comparées, d’une part, au comportement de référence des argiles minérales remaniées normalement consolidées établi par Biarez et Favre (1975, 1977), et, d’autre part, à la courbe de compression intrinsèque (ICL) proposée par Burland (1990). Les essais portent sur les paramètres d’identification wL, wp, VBS, wnat et sur les paramètres mécaniques cu, Cc, Cs, σ’c, OCR. La finesse du pas ainsi que la concordance des profils, permettent de mettre en évidence une genèse complexe ainsi que les spécificités de cette smectite marine naturelle : indice des vides de sédimentation, sensibilité, « surconsolidation » apparente, celle-ci traduisant une cohésion de type physico-chimique.
Abstract
A 14 meter long deepwater marine clay coree. from the Gulf of Guinea, is analysed with a 16.7 cm step and its behaviour compared on one hand, with the reference behaviour of the remoulded normally consolidated mineral clays established by Biarez et Favre (1975, 1977), and on the other hand with intrinsic compression (ICL) line proposed by Burland (1990). The index parameters wL, wp. MBV, wnat and the mechanical parameters cu, Cc, Cs, σ’c, OCR are highlighted in this experimental study. The thinness of the step, the agreement of the profiles, reveals a complex genesis as well as the specificities of this natural marine smectite such as : the void ratio of sedimentation, sensitivity, and a apparent « overconsolidation » which translates a physico-chemical cohesion type.
Mots clés : sédiments marins de grande profondeur / compressibilité / essais œdométriques / paramètres d’identification / cohésion non drainée
Key words: deepwater sediments / index properties / oedometric tests / compressibility / undrained cohesion
© CFMS-CFGI-CFMR-CFG 2006
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.