Free Access
Issue
Rev. Fr. Geotech.
Number 167, 2021
Article Number 4
Number of page(s) 11
DOI https://doi.org/10.1051/geotech/2021016
Published online 06 May 2021
  • AFNOR NF P94-051. 1993. Sols : reconnaissance et essais ; Détermination des limites d’Atterberg. Paris : Association Française de Normalisation, 15 p. [Google Scholar]
  • AFNOR NF P94-093. 1999. Sols : reconnaissance et essais ; Détermination des références de compactage d’un matériau. Paris : Association Française de Normalisation, 18 p. [Google Scholar]
  • AFNOR NF P94-110-1. 2000. Sols : reconnaissance et essais ; Essai pressiométrique Ménard – Partie 1 : essai sans cycle. Paris : Association Française de Normalisation, 43 p. [Google Scholar]
  • Antoinet E, Demongodin L, Habert J, Pozzi N, Pierson d’Autrey L. 2017. Recommandations pour la conception, le dimensionnement et la mise en oeuvre des géostructures thermiques. Rev Fr Geotech 149(1): 1–120. [Google Scholar]
  • Brandl H. 2006. Energy foundations and other thermo-active ground structures. Geotechnique 56(2): 81–122. [CrossRef] [Google Scholar]
  • Bourne-Webb P, Burlon S, Javed S, Kuerten S, Loveridge F. 2016. Analysis and design methods for energy geostructures. Renew Sustain Energy Rev 65: 402–419. [CrossRef] [Google Scholar]
  • Cekerevac C, Laloui L. 2004. Experimental study of thermal effects on the mechanical behaviour of a clay. Int J Numer Anal Methods Geomech 28: 209–228. [CrossRef] [Google Scholar]
  • Eslami H. 2014. Comportement Thermo-hydromécanique des sols au voisinage des géo-structures énergétiques. Thèse de doctorat, Université de Lorraine, France, 214 p. [Google Scholar]
  • Fromentin A, Pahud D, Laloui L, Moreni M. 1999. Pieux échangeurs : conception et règles de pré-dimensionnement. Revue française de génie civil 3(6): 387–421. [CrossRef] [Google Scholar]
  • Graham J, Tanaka N, Crilly T, Alfaro M. 2001. Modified Cam-Clay modelling of temperature effects in clays. Can Geotech J 38: 608–621. [CrossRef] [Google Scholar]
  • GTR. 2000. Guide technique : Réalisation des remblais et des couches de forme. Paris : LCPC, 102 p. [Google Scholar]
  • Gu K, Tang C, Shi B, Hong J, Jin F. 2014. A study of the effect of temperature on the structural strength of a clayey soil using a micropenetrometer. Bull Eng Geol Environ 73: 747–758. [CrossRef] [Google Scholar]
  • Laloui L, Moreni M, Vulliet L. 2003. Comportement d’un pieu bi-fonction, fondation et échangeur de chaleur. Can Geotech J 40(2): 388–402. [Google Scholar]
  • Loveridge F, Low J, Powrie W. 2017. Site investigation for energy geostructures. Q J Eng Geol Hydrogeol 50(2): 158–168. [CrossRef] [Google Scholar]
  • Marques MES, Leroueil S, Almeida MSS. 2004. Viscous behaviour of St-Roch-de-l’Achigan clay, Quebec. Can Geotech J 41: 25–38. [CrossRef] [Google Scholar]
  • Martin J-C. 2013. Carte de France des profils de température 0–200 m selon les zones climatiques. Rapport final. BRGM/RP-62281-FR, 17 p. [Google Scholar]
  • Moel M, Bach PM, Bouazza A, Singh RM, Sun JLO. 2010. Technological advances and applications of geothermal energy pile foundations and their feasibility in Australia. Renew Sustain Energy Rev 14: 2683–2696. [CrossRef] [Google Scholar]
  • Nowamooz H, Masrouri F. 2008. Hydromechanical behaviour of an expansive bentonite/silt mixture in cyclic suction-controlled drying and wetting tests. Eng Geol 101: 154–164. [CrossRef] [Google Scholar]
  • Pahud D, Fromentin A, Hubbuch M. 1999. Technical Report: Heat exchanger pile system of the dock midfield at the Zurich airport, detailed simulation and optimization of the installation. Switzerland: Swiss Federal Office of Energy. [Google Scholar]
  • Peron H, Lnellwolf C, Laloui L. 2011. A method for the geotechnical design of heat exchanger piles. In: Proceeding of the GeoFrontiers, Dallas, Texas, pp. 470–479. [Google Scholar]
  • Romero E, Gens A, Lloret A. 2003. Suction effects on a compacted clay under non-isothermal conditions. Géotechnique 53(1): 65–81. [CrossRef] [Google Scholar]
  • Tanaka N, Graham J, Crilly T. 1996. Stress-strain behaviour of reconstituted illitic clay at different temperatures. Eng Geol 47: 339–350. [CrossRef] [Google Scholar]
  • Uchaipichat A, Khalili N. 2009. Experimental investigation of thermo-hydro-mechanical behaviour of an unsaturated silt. Geotechnique 54(9): 339–353. [Google Scholar]
  • Wiebe B, Graham J, Tang GX, Dixon D. 1998. Influence of pressure, saturation and temperature on the behaviour unsaturated sand-bentonite. Can Geotech J 35: 194–205. [CrossRef] [Google Scholar]
  • Zhang G, Xia C, Sun M, Zou Y, Xiao S. 2013. A new model and analytical solution for the heat conduction of tunnel lining ground heat exchangers. Cold Regions Sci Technol 88: 59–66. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.