Yield design-based analysis of reinforced soil structures, making use of different models of reinforced soils

Free Access

Issue		Rev. Fr. Geotech. Number 175, 2023


Article Number		4
Number of page(s)		12
DOI		https://doi.org/10.1051/geotech/2023009
Published online		23 October 2023

Abdi R, de Buhan P, Pastor J. 1994. Calculation of the critical height of a homogenized reinforced soil wall: a numerical approach. Int J Numer Anal Meth Geomech 18: 485–505. [CrossRef] [Google Scholar]
Anthoine A. 1989. Mixed modelling of reinforced soils in the framework of yield design. Comput Geotech 7: 67–82. [CrossRef] [Google Scholar]
Anthoine A. 1990. Une méthode pour le dimensionnement à la rupture des ouvrages en sols renforcés. Rev Fr Geotech 50: 5–17. [CrossRef] [EDP Sciences] [Google Scholar]
Bensoussan A, Lions JL, Papanicolaou G. 1978. Asymptotic analysis for periodic structures. North-Holland, Amsterdam. [Google Scholar]
Blondeau F, Christiansen M, Guilloux A, Schlosser F. 1984. Talren : une méthode de calcul des ouvrages en sols renforcés. In: Int Colloq on In Situ Soil Reinforcement, Presses de l’ENPC. [Google Scholar]
de Buhan P. 1986. Approche fondamentale du calcul à la rupture des ouvrages en sols renforcés. Thèse d’État, Université Pierre et Marie Curie. [Google Scholar]
de Buhan P, Hassen G. 2010. Macroscopic yield strength of reinforced soils: from homogenization theory to a multiphase approach. C R Acad Sci 338: 132–138. [Google Scholar]
de Buhan P, Salençon J. 1987. Analyse de la stabilité des ouvrages en sols renforcés par une méthode d’homogénéisation. Rev Fr Geotech 41: 29–43. [CrossRef] [EDP Sciences] [Google Scholar]
de Buhan P, Salençon J. 1993. A comprehensive stability analysis of soil nailed structures. Eur J Mech, A/Solids 12(3): 325–345. [Google Scholar]
de Buhan P, Sudret B. 1999. A two-phase elastoplastic model for unidirectionally reinforced materials. Eur J Mech, A/Solids 18(6): 995–1012. [Google Scholar]
de Buhan P, Dormieux L, Salençon J. 1992. An interactive computer software for the yield design of reinforced soil structures. In: Int. Coll. « Informatique et Géotechnique », Paris. [Google Scholar]
de Buhan P, Mangiavacchi R, Nova R, Pelligrini G, Salençon J. 1989. Yield design of reinforced earth retaining walls though a homogenization method. Geotechnique 39: 189–201. [CrossRef] [Google Scholar]
de Buhan P, Bleyer J, Hassen G. 2017. Elastic, plastic and yield design of reinforced structures. London: ISTE-Elsevier. [Google Scholar]
Guéguin M, Hassen G, de Buhan P. 2015. Stability analysis of homogenized stone column reinforced foundations using a yield design numerical approach. Comput Geotech 64: 10–19. [CrossRef] [Google Scholar]
Hassen G, Guéguin M, de Buhan P. 2013. A homogenization approach for assessing the yield strength properties of stone column reinforced soils. Eur J Mech, A/Solids 37: 266–280. [Google Scholar]
Hassen G, Donval E, de Buhan P. 2021. Numerical stability analysis of reinforced soil structures using the multiphase model. Comput Geotech 133: 104035. [CrossRef] [Google Scholar]
Jellali B, Bouassida M, de Buhan P. 2007. A homogenization approach to estimate the ultimate bearing capacity of a stone column reinforced foundation. Int J Geotech Eng 1: 61–69. [CrossRef] [Google Scholar]
Jewell R, Pedley JM. 1990. Soil nailing design: the role of bending stiffness. Ground Eng: 30–36. [Google Scholar]
Mc Laughlin PV. 1972. Plastic limit behavior and failure of filament reinforced materials. Int J Solids Struct 8: 1299–1318. [CrossRef] [Google Scholar]
Michalowski PV, Zhao A. 1996. Failure of fiber-reinforced granular soils. J Geotech Eng, ASCE 122(3): 226–234. [Google Scholar]
Salençon J. 1990. An introduction to the yield design theory and its application to soil mechanics. Eur J Mech, A/Solids 9(5): 477–500. [Google Scholar]
Salençon J. 2013. Yield design. Wiley-ISTE. [CrossRef] [Google Scholar]
Sanchez Palencia E. 1980. Non homogeneous media and vibration theory. In: Lectures Notes in Physics 127. Berlin: Springer-Verlag. [Google Scholar]
Sawicki A. 1983. Plastic limit behavior of reinforced earth. J Geotech Eng, ASCE 109: 1000–1005. [Google Scholar]
Schlosser J, Unterreiner P, Plumelle C. 1993. Validation of calculation methods of soil nailed walls based on the experimentations of the National Project CLOUTERRE. Rev Fr Geotech 64: 11–20. [CrossRef] [EDP Sciences] [Google Scholar]
Simon B. 2012. Yield design applied to earth retaining structures. In: Proc Indian Geotech Conf, New Dehli. [Google Scholar]
Suquet P. 1983. Analyse limite et homogénéisation. C R Acad Sci, Paris 296(série II): 1355–1358. [Google Scholar]
Thai Son Q, Hassen G, de Buhan P. 2009. A multiphase approach to the stability analysis of reinforced earth structures accounting for a soil-strip failure condition. Comput Geotech 36: 454–462. [CrossRef] [Google Scholar]
Thai Son Q, Hassen G, de Buhan P. 2010. Seismic stability analysis of piled embankments: a multiphase approach. Int J Numer Anal Meth Geomech 34: 91–110. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.